08-20-2016, 05:26 PM
Hello,
I have a problem that is intermittent in nature. My current hardware is a Minidsp USB streamer in adat mode with a powered USB hub into a Nexus 6. I am feeding the USB streamer with Mytek converters via an RME ADI-4dd digital format converter which shows positive sync on all led indicator lights.
The software recognizes the USB device and allows me to set a track at 24 bit/48 khz. However, sometimes after this setup the track will have recorded at 44.1 khz and the pitch of the audio will be shifted down. Other times it will be garbled audio. I experience occasional clicks in the audio even when the sample rate holds. This same issue holds when I use USB audio recorder pro alone. I suspect a hardware problem but was hoping for some suggestions for possible settings tweaks or debug procedures.
Thank you.
I have a problem that is intermittent in nature. My current hardware is a Minidsp USB streamer in adat mode with a powered USB hub into a Nexus 6. I am feeding the USB streamer with Mytek converters via an RME ADI-4dd digital format converter which shows positive sync on all led indicator lights.
The software recognizes the USB device and allows me to set a track at 24 bit/48 khz. However, sometimes after this setup the track will have recorded at 44.1 khz and the pitch of the audio will be shifted down. Other times it will be garbled audio. I experience occasional clicks in the audio even when the sample rate holds. This same issue holds when I use USB audio recorder pro alone. I suspect a hardware problem but was hoping for some suggestions for possible settings tweaks or debug procedures.
Thank you.