Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Onkyo Granbeat plays DSD files and it does not output in DIRECT mode
#1
When Onkyo Granbeat plays 256 DSD file, the sample rate is always 48000 Hz and it is not DIRECT mode with 192000 Hz and 16 bit as stated in http://www.extreamsd.com/index.php/hires-audio-driver

The stock Onkyo app always have OFFLOAD mode  when play anything like 256 DSD like following:

Code:
Output thread 0xab8acc28 type 4 (OFFLOAD):
 Thread name: AudioOut_D6D
 I/O handle: 3437
 TID: 18699
 Standby: no
 Sample rate: 192000 Hz
 HAL frame count: 61440
 HAL format: 0x1a000004 (pcm-24bit-offload)
 HAL buffer size: 61440 bytes
 Channel count: 2
 Channel mask: 0x00000003 (front-left, front-right)
 Format: 0x1a000004 (pcm-24bit-offload)
 Frame size: 1 bytes
 Pending config events: none
 Output device: 0x8 (WIRED_HEADPHONE)
 Input device: 0 (NONE)
 Audio source: 0 (default)
 Normal frame count: 61440
 Last write occurred (msecs): 34
 Total writes: 140
 Delayed writes: 0
 Blocked in write: yes
 Suspend count: 0
 Sink buffer : 0xab887760
 Mixer buffer: 0xab8cbe80
 Effect buffer: 0xf43fe020
 Fast track availMask=0xfe
 AudioStreamOut: 0xab4157b0 flags 0x4031 (DIRECT|COMPRESS_OFFLOAD|NON_BLOCKING|
0x4000)
 Stream volumes in dB: 0:-28, 1:-30, 2:-39, 3:-30, 4:-30, 5:-30, 6:0, 7:-18, 8:
-23, 9:-96, 10:-23, 11:0, 12:0
 Normal mixer raw underrun counters: partial=0 empty=0
 1 Tracks of which 1 are active
   Name Active Client Type      Fmt Chn mask Session fCount S F SRate  L dB  R
dB    Server Main buf  Aux Buf Flags UndFrmCnt
   none    yes  16731    3 1A000004 00000003    3436 122880 A 3 192000     0
 0  00843000 0xab887760 0x0 0x000         0
 0 Effect Chains


Your app is good at Hi-res FLAC, WAVE (192000Hz/24bit) with DIRECT mode like this
Code:
Output thread 0xab8acc28 type 1 (DIRECT):
 Thread name: AudioOut_D83
 I/O handle: 3459
 TID: 19005
 Standby: no
 Sample rate: 192000 Hz
 HAL frame count: 7680
 HAL format: 0x1 (pcm16)
 HAL buffer size: 30720 bytes
 Channel count: 2
 Channel mask: 0x00000003 (front-left, front-right)
 Format: 0x1 (pcm16)
 Frame size: 4 bytes
 Pending config events: none
 Output device: 0x8 (WIRED_HEADPHONE)
 Input device: 0 (NONE)
 Audio source: 0 (default)
 Normal frame count: 7680
 Last write occurred (msecs): 20
 Total writes: 666
 Delayed writes: 0
 Blocked in write: yes
 Suspend count: 0
 Sink buffer : 0xab8ae9c0
 Mixer buffer: 0xab887760
 Effect buffer: 0xab8cbe80
 Fast track availMask=0xfe
 AudioStreamOut: 0xab468720 flags 0x2001 (DIRECT|0x2000)
 Stream volumes in dB: 0:-28, 1:-30, 2:-39, 3:-30, 4:-30, 5:-30, 6:0, 7:-18, 8:
-23, 9:-96, 10:-23, 11:0, 12:0
 Normal mixer raw underrun counters: partial=0 empty=0
 1 Tracks of which 1 are active
   Name Active Client Type      Fmt Chn mask Session fCount S F SRate  L dB  R
dB    Server Main buf  Aux Buf Flags UndFrmCnt
   none    yes  14414    3 00000001 00000003    3458 131072 A 3 192000     0
 0  004E2A00 0xab8ae9c0 0x0 0x000         0
 0 Effect Chains


Besides, when I setup HiRes driver flags with Offload, it's always failed to setup HiRes.

I think your app use DIRECT mode with Snapdragon, not internal ESS Sabre DAC. So please help investigating this case and let me know if you need more info
Reply


Messages In This Thread
Onkyo Granbeat plays DSD files and it does not output in DIRECT mode - by bragon01 - 09-04-2018, 02:41 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)