12-02-2015, 12:46 PM
Hello,
I've got Audiorecorder Pro and try to make it work on LG 8.3 Pad connected to an externally powered Steinberg UR22 MkII
audio interface. I connect the UR22 MKII and a LED lights up permanently, indicating that USB is active.
I start USB Audiorecorder Pro and get "Audio Interface initialized".
I start RECORD, the time counter runs and the upside slider display moves.
But in some cases i can see the VU Audiometer, in other cases i cannot see it, actually I don't see it.
After a few seconds of recording I get
"Error: No input Channel"
and the app seems to be crashed, no further recording is possible.
I can select a file for playback but it can not be startet.
I disconnect USB, close the App, reconnect USB, wait for the LED on the UR22 MKII, start the app and make a very short
recording, say 3 seconds, and stop recording. I can select a recording and can start it, but in some cases i can hear the sound on my tablet, in other cases I can not. In some times I get the Audometer, in other cases I do not. After a short time the app will crash again showing
"Disconnecting a USB audo device...).
But I didn't disconnect it and the LED on the UR22 MKII lights permanently. (When I do disconnect USB, it would darken).
Further Problems are:
The app "forgets" its IO-settings
The button "Mon" has no effect.
BUT:
As long as the LED on the UR22 MKII lights up it is possible to use use interface manually (setting IO-level,
phantom power, phone level an so on), suggesting, that the USB driver in the tablet is still active,
even when tha app has crashed.
The LG8.3 tablet is in "Fligt mode".
I tried different buffer sizes.
I DO NOT ENCOUNTER ANY PROBLEM ON OTHER USB APPS (such as camera control...) on my LG 8.3 tablet.
Please HELP!
I've got Audiorecorder Pro and try to make it work on LG 8.3 Pad connected to an externally powered Steinberg UR22 MkII
audio interface. I connect the UR22 MKII and a LED lights up permanently, indicating that USB is active.
I start USB Audiorecorder Pro and get "Audio Interface initialized".
I start RECORD, the time counter runs and the upside slider display moves.
But in some cases i can see the VU Audiometer, in other cases i cannot see it, actually I don't see it.
After a few seconds of recording I get
"Error: No input Channel"
and the app seems to be crashed, no further recording is possible.
I can select a file for playback but it can not be startet.
I disconnect USB, close the App, reconnect USB, wait for the LED on the UR22 MKII, start the app and make a very short
recording, say 3 seconds, and stop recording. I can select a recording and can start it, but in some cases i can hear the sound on my tablet, in other cases I can not. In some times I get the Audometer, in other cases I do not. After a short time the app will crash again showing
"Disconnecting a USB audo device...).
But I didn't disconnect it and the LED on the UR22 MKII lights permanently. (When I do disconnect USB, it would darken).
Further Problems are:
The app "forgets" its IO-settings
The button "Mon" has no effect.
BUT:
As long as the LED on the UR22 MKII lights up it is possible to use use interface manually (setting IO-level,
phantom power, phone level an so on), suggesting, that the USB driver in the tablet is still active,
even when tha app has crashed.
The LG8.3 tablet is in "Fligt mode".
I tried different buffer sizes.
I DO NOT ENCOUNTER ANY PROBLEM ON OTHER USB APPS (such as camera control...) on my LG 8.3 tablet.
Please HELP!