External MIDI controller and synth

[Ray007]

I can't see anywhere in Audio Evolution Mobile to control the input signal level from software. On the mixer strip for the track, you can select the UR242 input (stereo 1-2, stereo 3-4, mono 1, mono 2, mono 3,  mono 4 - though there might be a bug there with the mono inputs being treated as stereo, I'm going to investigate and put a post in if it's not just me being dim), but no input level control.

Thanks Tom for replying.
According AE website, "When your USB audio interface exposes internal controls such as input gain and volume, they will be presented on the Hardware mixer screen."
 

You can, "Tap the top-right icon three times to arrive at the hardware mixer screen."
"If you do not see this screen and you arrive back on the time line screen, your device does not expose any controls and you will need to adjust settings using the physical knobs on your device, when available.

There can be many controls: if they do not fit on the screen, you can swipe the controls by sliding your finger left-right at the bottom texts of the controls.

There are three types of controls:

• Out vol: controls output volume
  
  
• Gain: controls input gain
  
  
• Mon: controls zero-latency monitoring: the amount of input signal that is fed directly to the output to hear yourself playing/singing."
  

So I was hoping that you might be able to control direct monitoring on your UR242 from within Audio Evolution.

Cheers,
Ray