Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
User Guide
#1
Is there a user guide somewhere that explains each setting and what it does?
Reply
#2
All I could find for UAPP Toneboosters user manual was in the full Toneboosters manual 2015, at https://manualzz.com/doc/2326328/%C2%A9-...-2010-2015 . This manual describes the extensive complete Toneboosters parametric EQ system, which has a LOT of bells and whistles. The version embedded in UAPP is much reduced in complexity and scope, and seems to be only partially covered in the manual. 

Section 7.3 - User Interface, starting on page 29, combined with my interpretation:

6 filter sections with several controls to modify their behavior

Note: all 6 filter sections are always processing the audio signal whether or not the filter section amplitude or gain is set to 0. 

Also: Bit Perfect is automatically inhibited when Toneboosters EQ is enabled.

Parameters:

Filter type: Select  the filter  type  of  the  current  section - low frequency pass (low shelf), high frequency pass (high shelf),  bell  shape (analog bell, digital bell, digital bell 2 (more sophisticated digital bell)), blocking filter, etc.

Frequency: Sets the frequency of the currently selected section.

Gain: Sets the gain (in dB) of the current filter section (gain (+), cut (-)).

Quality Factor (Q): Sets the quality factor of the current filter section. This sets the bandwidth and rise/fall characteristics of the filter. A higher Q value means a narrower bandwidth/greater resonance or ringing or peakiness (depending on the filter type). About 0.72-0.73 seems to be critical or optimal damping (steepest rise/fall time/frequency slope that can be combined with no ringing). The tradeoff is that larger values of Q produce narrower band filters that can damp out narrower band mechanical/electrical resonances in the transducer with lesser effect on adjacent frequencies, at the cost of ringing and peakiness.

Mode: Determines whether the section applies its processing in stereo, left only, right only, mid only or side only channels.

Amount: Sets the amount of processing for the current section. 0% means that the filter is not being applied; 100% indicates full processing.
Reply
#3
The world of web development and website design has evolved dramatically in recent years. With a huge variety of options and platforms available, companies have a lot more flexibility and control when it comes to developing their websites. Companies need to be very careful about what they choose and the features they include for their websites. There are many things to consider including the following: Customization options by https://mlsdev.com/services/mobile-app-development, platform and size, reliability and security, and user experience. While you can complete all these tasks yourself, it may not be in your best interest to do so.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)